manualshive.com logo in svg

Uniden DXAI 7288-2 Series, Owner'S Manual, Page: 3 / 68

Share
Download
Uniden DXAI 7288-2 Series Owner'S Manual Download Page 3

[ 2 ]

w w w . u n i d e n . c o m

Welcome

Features

• 2.4GHz Extended Range Technology
• Dual Handset System 

(Extra Handset & Charger Included)

• Call Transfer from Handset to Handset
• Integrated Telephone Answering Device

(ITAD) 

• Trilingual Voice Prompts (English, French 

or Spanish Support)

• 3 Line Backlit Displays
• Caller ID and Caller ID on Call Waiting

• 10 Speed Dial Memory
• One touch Rocketdial®
• Last Number Redial
• English, French or Spanish Support
• Pulse/Tone Dialing
• Find  Handset
• Earpiece Volume Control
• Ringer  Volume  Control
• Hearing Aid Compatible
• 20 Channel Autoscan

Be sure to visit our web site: www.uniden.com

Uniden® and Rocketdial® are registered trademarks of Uniden America Corporation.
AutoTalk, AutoStandby, UltraClear Plus, Random Code, and AutoSecure are trademarks of 
Uniden America Corporation.

Congratulations on your purchase of the Uniden dual handset cordless telephone and answering 
system. This phone is designed and engineered to exacting standards for reliability, long life, and 
outstanding performance.

Note: Illustrations in this manual are used for explanation purposes. Some 

illustrations in this manual may differ from the actual unit. The color of your 
cordless phone may vary.

UP038.book  2 ページ  ２００４年１月２６日　月曜日　午前１０時１７分

Summary of Contents for DXAI 7288-2 Series





































































Reviews:

No comments