[ 2 5 ] U S I N G T H E S P E E D D I A L M E M O R Y
w w w . u n i d e n . c o m
5)
Store Number
is displayed. The cursor flashes indicating that the
display is ready for the number to be entered.
6) Use the keypad to enter the phone number; each number can be
up to 20 digits.
If you need the phone to pause during the dialing sequence, press
the
redial/pause
key to insert a two-second delay between the
numbers. You can enter multiple pauses to increase the delay.
Each pause counts as a digit. The display shows a
P
for every
pause.
When storing numbers into memory, if the handset is idle (i.e., no key is pressed) for more
than 30 seconds, it will beep rapidly, and the phone will return to standby mode.
7) Press the
memory
key. You will hear a confirmation tone, and the
following screen appears.
Memory storage is complete.
After about 2 seconds, the following screen displays all the speed
dial memory entries.
8) Press the
end
key to exit memory setup mode. The phone returns
to standby.
USING
THE SP
EED D
IA
L
M
E
MO
R
Y
UP038.book 25 ページ ２００４年１月２６日 月曜日 午前１０時１７分
Summary of Contents for DXAI 7288-2 Series
Page 1: ...DXAI 7288 2 ...
Page 64: ...Memo UP038 book 63 ページ ２００４年１月２６日 月曜日 午前１０時１７分 ...