Uniden DX3555 Manual Download Page 4

Page: 4 / 62

Introduction

Congratulations on your purchase of a Uniden Cordless Telephone. The

DX3555/65

phones are designed with exacting standards to provide

reliability, long life, and outstanding performance.

Note:

These phones are available in two designer colors, and these colors
are designated by different model numbers. Accordingly, this
manual describes the operation of both the

DX3555

, and the

DX3565

phones.

Features

•

Voice Scramble Security

•

25 46/49 MHz Channels

•

Dual Keypads for added flexibility

•

Random Code



Digital Security

•

AutoSecure



•

Tone/Pulse Dialing

•

AutoTalk



•

AutoStandby



•

20 Number Memory

•

2-Way Paging/Intercom

•

5 One-Touch Memory Buttons

•

3-Way Communication

•

UltraClear Plus

•

Battery Saving Feature

•

Redial/Pause and Flash

•

Base/Handset Volume Controls

The

DX3555/65

protects your privacy by allowing you to scramble any

call you make or receive. A simple press of the scramble button changes the

RF signal

between the Handset and Base Unit, making it difficult or

impossible for someone to receive and understand your phone calls.

To protect you against misbilled calls which might result from your phone
being activated by other equipment, the

DX3555/65

has

Random Code



digital security which automatically selects one of over 65 thousand digital
security codes for the Handset and Base Units. Also the

AutoSecure



feature electronically locks your phone when the Handset is in the Base.

Other

DX3555/65

features include

AutoTalk



and

AutoStandby



AutoTalk



allows you to answer a call by just removing the Handset from

the Base so you don’t have to waste time pushing buttons or flipping
switches.

AutoStandby



allows you hang up by simply returning the

Handset to the Base.

The

UltraClear Plus

true compander circuitry virtually eliminates background

noise. This innovative technology together with 25 different channels
provides you with the best possible reception during all of your conversations.

To get the most from your phone, please read this Operating guide
thoroughly. Also be sure to complete the Product Registration form and mail
it in.

Summary of Contents for DX3555






























































Search results

Summary of Contents for DX3555

Reviews:

Related manuals for DX3555

Brands by name

Popular brands

Uniden DX3555, Manual

Search results

Summary of Contents for DX3555

Reviews:

Related manuals for DX3555

Brands by name

Popular brands