Uniden DSS3435+1 Owner'S Manual Download Page 7

Page: 7 / 72

[6]

Product Overview

Main Phone Features

Answering System Features

• 2.4GHz Digital Expandable System expands up to

4 Handsets

• Integrated Digital Answering System

• Caller ID*

- Caller ID on Call Waiting*

- Distinctive Ring** by Party

- Name Tag** (POP ID) - Caller Name

Identification

• Base Keypad (DSS3455 base only)

• 100 shared Phonebook Entries/Caller ID Numbers

• DirectLink Two-Way Communication

• Room/Baby Monitoring

• Speakerphones on Base & Handset

• 20 Ringer Options (10 Tones/10 Melodies)

10 Handset Speed Dial Numbers

10 Base Speed Dial Numbers (DSS3455 base only)

• Last 3 Number Redial

• Copy Phonebook Entries to Another Handset

• Call Transfer

• Conferencing

• Intercom

• Digital Tapeless Recording

• Up to 12 Minutes of Recording Time

• Personal or Pre-recorded Outgoing Messages

• Day and Time Announcement

• Remote Message Retrieval

• Toll Saver

• Conversation Recording

• Voice Memo

• Message Alert

• Records Up to 59 messages

•

• Keypad Lock

* Requires subscription to Caller ID and Caller ID on Call Waiting service provided by Network supplier. There is

usually a fee for this service. The Caller ID on Call Waiting service is currently unavailable in NZ.

** These features rely on the Caller ID service to function.

# Range may vary depending on environmental and/or topographical conditions.

Summary of Contents for DSS3435+1









































































Search results

Summary of Contents for DSS3435+1

Reviews:

Uniden DSS3435+1, Owner'S Manual, Page: 7 / 72

Search results

Summary of Contents for DSS3435+1

Reviews: