Uniden DSS3435+1, Owner'S Manual, Page: 48 / 72

[47]
Setting the Day & Time
If you do not set the clock on your answering system, your messages may not have the correct time and day
stamp.
You can set the day and time from the handset or the base.
From the base
[menu/clock]
[ /select] [ /select]
[set]
[ /select] [ /select]
[set]
[ /select] [ /select]
[set]
[ /select] [ /select]
[set]
[menu/clear]
[select/ ].
[select/ ]
[ ] [ ]
[select/ ]
[ ] [ ]
[select/ ]
[ ] [ ]
[select/ ]
[ ] [ ]
[select/ ]
1. Press .
2. Press or until the correct day is announced
and the message counter shows the corresponding number (1 for
Sunday, 2 for Monday, etc.).
3. Press to select the day.
4. Press or until you hear the correct hour
setting. The numbers 1 through 12 appear on the base as each
hour is announced.
5. Press to select the hour.
6. Press or until you hear the correct minute
setting. The numbers 00 through 59 appears on the base as each
minute is announced.
7. Press to select the minute.
8. Press or until you hear the correct AM or
PM setting. The message counter displays A or P.
9. Press to select the AM/PM setting. A confirmation tone
sounds, and the day and time are announced for your review.
1. Press .
2. Move the cursor to GLOBAL
SETUP and press
3. Move the cursor to DAY & TIME
and press .
4. Use and to select
the correct day, and press
.
5. Use and to select
the correct hour, and press
.
6. Use and to select
the correct number of minutes,
and press .
7. Use and to select
AM or PM, and press
. You hear a
confirmation tone.
From the handset