Uniden DSS2415, Manual Quick Start

Page: 46 / 56

[ 40 ]
REGISTER THE HANDSET
If you purchase an extra handset, you need to register the handset to the
main base before use. Only one handset can be registered at a time.
The handset ID for the supplied handset(s) was assigned at the factory, which has
#1 in the display. When you register additional handset to the base, the handset
ID will be assigned.
An extra handset can be registered when the base is in the standby mode.
1) Before registering the extra handset, charge the phone’s battery for 10 minutes.
2) Place the extra handset in the main base unit to begin registration.
3) While the handset is registering, “ Handset Registering ” will appear in the LCD.
When “
Registration Complete
” is displayed, the handset has been registered to
the base. If “ Registration Failed ” appears, please try these steps again.
4) Place the handset back in the charging cradle and fully charge the phone’s battery
for 17 to 20 hours.
DSS2415
Main Base
DSS2455/2465
Main Base
Charger
UP306BH (DSS2415) ENG OM 8/6/03 9:57 AM Page 40