[ 59 ]
Intercom
From handset to handset or to the base
1) Press
in the standby mode.
2) Select the base or the handset you want to talk with
from the selection list within 30 seconds. To select the
handset (or the base), press
/
▲
or
▼
, then
press the
OK
soft key.
If you select “
All
”, all handsets will be paged. An
intercom tone sounds.
3) On the receiving handset (or the base), to answer the call, press
,
, or the
ANSWER
soft key (or
or
(talk) on the
base). Or press any number key,
, or
(when Anykey Answer is On), or
pick up the handset from the cradle (when AutoTalk is On).
4) To hang up the intercom call, press
or the
END
soft key on either handset (or
press on
the
base).
From the base to a handset
1) Press
on the base in the standby mode.
2) Select the handset you want to talk with by pressing the number key (
1
-
4
).
To page all the handsets press
.
3) Follow the steps 3-4 under “From handset to handset or to the base”.
T o i n t e r c o m
H a n d s e t # 2
H a n d s e t # 3
BACK
BACK
OK
INTERCOM/CALL TRANSFER FEATURE
Intercom and Call Transfer features are available for your phone.
• If the party is busy or out of range, you will hear a beep and the handset returns to the
standby mode.
• If any of the following occurs, the operation will be canceled.
- Press
or
on the handset, and
(talk) on the base.
- Receive an outside/intercom call or page (while selecting the other handset).
• When the party does not answer within 1 minute, Intercom or Call Transfer is canceled.
UP308BH (DSS2465) ENG OM 1/14/05 11:49 AM Page 59
