Installing the AA batteries
1) Press down on the battery cover release and slide the
cover down until it comes off.
2) Install the batteries supplied with your phone, observing
c - polarity.
•
Use only “AA”
rechargeable Ni-MH
batteries.
Do Not use
Alkaline, Lithium, or
non-rechargeable
batteries. Using
incorrect batteries
could damage or limit
the performance of
this unit.
• Recharge your phone
on a regular basis by
returning the handset
to the charger after
each phone call.
[ iii ]
4) Set the base on a desk or tabletop.
5) Rise the antenna to a vertical position.
Connecting the charger - DSS2465 only
1) Connect the AC adapter into the charging
cradle and to a AC wall outlet.
2) Set the charger on a desk or tabletop, and
place the handset in the charger with the
keypad facing forward (see “Installing the
AA batteries” below to install the batteries.
UP308BH (DSS2465) ENG OM 1/14/05 11:44 AM Page iii
