Uniden DECT3080 SERIES User Manual Download Page 7

Page: 7 / 68

Installing the Phone

Installing the Battery

Use.only.the.Uniden.BT-0.rechargeable.battery.pack.supplied.with.your.cordless.telephone.

Locate the battery pack,

battery cover and the

handset.

Push the battery pack

connector in firmly. (You

should hear it click into

place.) Gently tug on the

battery wires to make

sure the connection is

secure.

Line up the red and black wires on

the battery pack connector with

the sticker in the handset’s battery

compartment.

Place the cover over the

battery compartment

and slide it up into

place.

Battery

pack

Battery

cover

Handset

Locate the battery pack,

battery cover and the

handset.

Push the battery pack

connector in firmly. (You

should hear it click into

place.) Gently tug on the

battery wires to make

sure the connection is

secure.

Line up the red and black wires on

the battery pack connector with

the sticker in the handset’s battery

compartment.

Place the cover over the

battery compartment

and slide it up into

place.

Battery

pack

Battery

cover

Handset

Summary of Contents for DECT3080 SERIES





































































Search results

Summary of Contents for DECT3080 SERIES

Reviews:

Related manuals for DECT3080 SERIES

Brands by name

Popular brands

Uniden DECT3080 SERIES, User Manual

Search results

Summary of Contents for DECT3080 SERIES

Reviews:

Related manuals for DECT3080 SERIES

Brands by name

Popular brands