Handset registration
!
You don’t need to register any handsets which were
supplied as part of the system with your base unit —
they are already registered. But if you’ve bought any
extra handsets separately, you’ll need to register them.
To check whether a handset is already registered,
make
sure mains power to the base unit is switched on
and the handset is within range
. The handset’s display
should show its name (default
) and number.
If the display constantly shows
No base found
, you
need to register the handset.
Each handset can be registered to
up to four base
units
, which have numbers 1 to 4.
To re-register
or to register a
new handset
1
On the base unit, press and hold the
HANDSET LOCATOR
button until you hear
Registration tone (repeated ‘beeps’)
You now have
60 seconds
to register the
handset.
2
On the handset, press the right Soft button
[
Menu
], then press the
or
button to
scroll to
Handset
3
Press the right Soft button [
OK
]
4
Press the
or
button to scroll to
Register,
then press the right Soft button [
OK
]
u
The display shows a list of base units. If any
of these numbers has a tick next to it, the
handset is already registered to that base unit.
5
Move the highlight to
BASE: 1
then press the
right Soft button [
OK
]
u
The display shows
Base-PIN:
6
Key in the base unit’s PIN code (default 0000)
If the base unit’s PIN code has been changed
from 0000 (see page 44), you’ll need to know
the current PIN code.
28
Handset
Summary of Contents for DECT1915
Page 63: ...60...
