manualshive.com logo in svg

Uniden DECT 1535 Series, Owner'S Manual

Share
Download
Uniden DECT 1535 Series Owner'S Manual Download Page 29

29

AC Adapter and Battery Information

• 

Use only the supplied AC adapters. Be sure to use the proper adapter for the 

base & any chargers.

• 

Do not place the power cord where it creates a trip hazard or where it could 

become chafed and create a 

fire or electrical hazard. 

• 

Do not place the unit in direct 

sunlight or subject it to high 

temperatures.

• Fully charged, the battery 

should provide about 7 hours 

of talk time and about 6 days 

of standby time. For best 

results, return the handset to 

the cradle after each call to 

keep it fully charged. 

• When the battery gets too 

low, the handset shows a low battery alert. If you hear a strange beep during a 

call, check the display: if you see the low battery alert, finish your conversation 

as quickly as possible and return the handset to the cradle. If the handset is in 

standby, none of the keys will operate.

• With normal use, the battery should last about one year. Replace the battery 

when the talk time becomes short even when the battery is charged. To buy a 

replacement battery, visit our website listed on the front cover. 

Rechargeable Nickel-Metal Hydride Battery Warning

• This equipment contains a rechargeable Nickel-Metal Hydride (Ni-MH) battery. 

• Do not short-circuit the battery.

• The rechargeable Ni-MH batteries contained in this equipment may explode if 

disposed of in a fire. 

• Do not charge the battery used in this equipment in any charger other than the 

one designed to charge this battery as specified in the owner's manual. Using 

another charger may damage the battery or cause it to explode.

AC 

adapter

Base/Charger

Part number

AAD-041S(M) /

AAD-600S(M)

Input voltage

240V AC, 50 Hz

Output voltage 9V DC @350mA /

9V DC @210mA

Battery 

pack

Part number

BT-694m

Capacity

300mAh, 2.4V DC

Summary of Contents for DECT 1535 Series





































Reviews:

No comments

Brands by name

Popular brands

Load more brands