12
Global Setup
Menu
The settings on this menu affect all handsets. Only one handset at a
time can change these menu options.
Set Line Mode
Do not change this setting unless instructed to by
customer service.
Insert 0
This feature adds “0” or “00” at the beginning of
the number received from Caller ID. The default
setting for New Zealand is ON. The default setting
for Australia is OFF.
Edit Voice Mail
If you subscribe to a Voice Mail service you can set
the Voice Mail number (see page 20).
VMWI Reset
Reset your Visual Message Waiting Indicator to
bring it back in sync with your voice mail service.
Entering Text on Your Phone
Use the 12-key dial pad when you want to enter text into your phone
(a name in the phonebook, the handset banner, etc.).
x
The phone defaults to a capital letter for the first letter and any
letter after a space; otherwise, it uses small letters.
x
To switch to all capital letters, press
*
.
The phone defaults to all
capital letters first (e. g. ABCabc2) until you enter a blank space or
press
*
again. (Any time you want to change case, just press
*
.)
x
If two letters in a row use the same number key, enter the first letter
and wait a few seconds (or press
RighT
); the cursor will move to the
next space. Enter the next letter.
x
Press
#
to enter a blank space.
x
To change a letter, move the cursor to that letter and press
ClEAR
to
erase the letter. Then, enter the new one.
x
To erase the entire entry, press and hold
ClEAR
.
x
Press
0
to cycle through all available symbols and punctuation.
