24
Using the System While You're Away from Home
You can also use your answering system from any touch-tone phone.
Before you can use this feature, you must program a security code.
Programming a security code
1. With the phone in standby, open the menu from any handset.
2. Select
Ans. Setup
, then select
Security Code
.
3. Use the number keypad to enter a two-digit security code (
00
to
99
). Press
mENU/sElECT
when you’re finished.
#
Remember to make a note of your new security code!
Dialing In to Your System
1. Call your telephone number and wait for the system to answer.
(If your answering system is off, it will answer after 15 rings and
sound a series of beeps instead of your greeting.)
2. During the greeting or beeps, press
#
and
immediately
enter your
security code. If you enter it incorrectly 3 times, the system hangs
up and returns to standby.
3. The system announces the current time, the number of messages
stored in memory, and a help prompt. It will beep intermittently to
let you know it's waiting for your command.
4. When you
hear beeping,
enter a 2-digit
command from
this chart:
#
If you don't press any keys for 15 seconds, the system hangs
up and return to standby.
#1 Repeat message
#2 Play message
#3 Skip message
#4 Delete message
#5 Stop playback
#6 Turn the system on
#9 Turn the system off
#0 Hear help prompts
