18 - English
• Enter the phone number (up to 32 digits) exactly as you would dial it.
• If you need the phone to wait before sending the next set of digits, press
reDial/
Pause
to insert a 2-second pause. You can insert multiple pauses, but each one
counts as a digit (you’ll see
P
in the display).
• To edit the name, press
PHOnebOOk
(left key) to move the cursor back and insert a
letter. Press
Clear
to delete a letter.
• To edit the number, press
Clear
to back up the cursor and delete numbers. Re-
enter the correct numbers.
Deleting All the Phonebook Entries
With the phone in standby, open the phonebook. Select the phone name
and then
Delete All
. To confirm, select
Yes
.
USING SPECIAL FEATURES
Silent Mode
You can silence the ringers on the base and all handsets for a specific period of time;
the answering system answers any incoming calls without playing anything through
the speaker.
1. With the phone in standby, press and hold
silent
on any station. The phone
prompts you to select the number of hours (
1
-
9
or
Always On
) that you want it to
stay in silent mode.
2. To confirm, press
seleCt
or just wait about 5 seconds. The phone turns on the
answering system and displays
Silent Mode On
on each station.
3. After the selected number of hours, the phone automatically exits silent mode. To
exit silent mode manually, press and hold
silent
again.
#
If the phone is in silent mode and you turn off the answering system, the
phone exits silent mode.
Call Block
If you subscribe to Caller ID, you can save phone numbers to the call block list.
When a call comes in, the phone compares the received phone number to the
numbers on the call block list. If the phone number is on the list, the phone replaces
the caller's name with
Call Blocked
and blocks the call.
#
You can reject an incoming call from CellLink directly; press
Delete
on the
base.
The call block list holds 20 entries, and all stations share the same list. You can add
entries by selecting
Add Call Block
in the CID menu that displays after you have
viewed the CID record or through the
Call Blocking
menu (see below). (Only one
station can edit the call block list at a time.)