22 - English
Battery pack (with normal use)
Part number
BT-1031
Capacity
400mAh, 2.4V DC
Talk time
about 7 hours
Standby time
about 7 days
Battery life
about 1 year
x
Replace the battery when the talk or standby time
becomes noticeably reduced. For replacements, call
the Parts Department (see the front cover).
x
When the battery gets low, the handset beeps and
shows a low battery alert; put the handset in the
cradle for recharging.
Rechargeable Battery Warning
x
This equipment contains a rechargeable Nickel-
Metal-Hydride (Ni-MH) battery.
x
Nickel is a chemical known to the state of Califor-
nia to cause cancer.
x
Do not short-circuit the battery.
x
The batteries in this equipment may explode if
disposed of in a fire.
x
Do not charge the batteries in any charger other
than the one specified in the owner's manual.
Using another charger may damage the battery or
cause it to explode.
x
As part of our commitment to
protecting our environment and conserving
natural resources, Uniden
voluntarily participates in
an RBRC® industry program
to collect and recycle used
Ni-MH batteries within the
United States. Please call
1-800-8-BATTERY for
information on Ni-MH battery
recycling in your area. (RBRC® is a registered
trademark of the Rechargeable Battery Recycling
Corporation.)
Rechargeable batteries must be recycled or
disposed of properly.
Warning! The cords on this product and/or
accessories contain lead, a chemical known
to the state of California to cause birth
defects or other reproductive harm. Wash
hands after handling.
Uniden works to reduce lead content in our
products & accessories.
Compliance Information
FCC Part 68 Information
This equipment complies with Part 68 of the FCC
rules and the requirements adopted by the ACTA.
On the bottom of this equipment is a label that
contains, among other information, a product
identifier in the format US: AAAEQ##TXXXX.
If requested, this number must be provided to the
phone company.
An applicable Universal Service Order Codes
(USOC) certification for the jacks used in
this equipment is provided (i.e., RJ11C) in the
packaging with each piece of approved terminal
equipment. A plug and jack used to connect this
equipment to the premises wiring and telephone
network must comply with the applicable FCC
Part 68 rules and requirements adopted by the
ACTA. A compliant telephone cord and modular
plug is provided with this product. It is designed
to be connected to a compatible modular jack that
is also compliant. See installation instructions
for details.
The REN is used to determine the number of
devices that may be connected to a phone line.
Excessive RENs on a phone line may result in
devices not ringing in response to an incoming
call. In most but not all areas, the sum of RENs
should not exceed five (5.0). To be certain of the
number of devices that may be connected to a
line, as determined by the total RENs, contact the
telephone provider. The REN for this product is
part of the product identifier that has the format
US:AAAEQ##TXXXX. The digits represented by
## are the REN without a decimal point (e.g., 03 is
a REN of 0.3).
If this equipment causes harm to the telephone
network, the telephone company will notify you
in advance that temporary discontinuance of
service may be required. But if advance notice
isn't practical, the telephone company will notify
the customer as soon as possible. Also, you will be
advised of your right to file a complaint with the
FCC if you believe it is necessary. The telephone
company may make changes in its facilities, equip-
ment, operations or procedures that could affect
the operation of the equipment. If this happens the
telephone company will provide advance notice in
order for you to make necessary modifications to
maintain uninterrupted service.
Please follow instructions for repairing, if any (e.g.
battery replacement section); otherwise do not
substitute or repair any parts of the device except
as specified in this manual. Connection to party
line service is subject to state tariffs. Contact the
state public utility commission, public service
commission or corporation commission for infor-
mation. This equipment is hearing aid compatible.
If you experience trouble with this equipment,
contact the manufacturer (see the cover of this
manual for contact information) or an authorized
agent. If the equipment is causing harm to the
telephone network, the telephone company may
request that you disconnect the equipment until
the problem is resolved.
If your home has wired alarm equipment con-
nected to a phone line, be sure that installing the
system does not disable your alarm equipment. If
you have questions about what will disable alarm
equipment, contact your telephone company or a
qualified installer.
