background image

14 - English

Choose this... To...

Edit

Edit this entry. The phone will prompt you to edit the name & 

phone number. 

Delete

Erase this entry from the list & allow calls from this number.

Multihandset Features

 

#

To use the features in this section, you need at least 2 handsets.

•  Your base supports a total of 12 cordless handsets: the one that came with the 

base and up to 11 accessory handsets. Your base also supports a total of 2 DRX100 

range extenders, including any that came with your phone.

•  You must register accessory handsets to the base before using them. (Handsets 

that came packaged with the base are already registered.)

•  Handsets that aren’t registered display a 

Not Registered

 message. For registration 

instructions, see page 21, or see the accessory handset manual.

•  If a handset was ever registered to a base, you must reset it before it can register to 

a new base; see page 21, or see the accessory handset manual.

Conference Calling

•  When an outside call comes in on the land line, four handsets can join in a 

conference call with the outside caller. 

•  To join a call that’s already in progress, just press 

TALK/FLASH

 or 

SPEAKEr

•  To leave the conference call, hang up normally; the other handsets remain 

connected to the call. 

Call Transfer

To...

On the land line

transfer a call

Press 

inTErcOM

, then select the handset you want 

to transfer the call to (select 

ALL

 to page all the 

handsets). When the other handset accepts the 

call, you’ll be disconnected.

cancel a transfer and leave 

the call on hold

Press 

End

.

return to the call

Press 

TALK/FLASH

.

answer a call transfer page

1.  Press 

inTErcOM

. You can speak to the 

transferring handset.

2.  To speak to the outside caller,
Press 

inTErcOM

 or 

TALK/FLASH

.

Privacy Mode

To activate privacy mode on a land line call in progress, press 

MEnu/SELEcT

. The 

current call privacy mode displays as a menu selection. If you want to change the 

privacy mode, select it. As long as privacy mode is on, you'll see a 

P

 in the display, 

Summary of Contents for D2380-3

























Reviews: