Uniden D1789 series, User Manual

Page: 24 / 28

24 - English
audio issues Possible solutions
There’s a lot of
noise or static
on the line
x
Check for interference from appliances (microwave ovens, TVs, etc.) or
wireless devices (baby monitors, WiFi equipment, etc.). Move the handset
or base away from the interference source.
x
If you use a telecoil hearing aid, turn on T-coil mode (see page 11).
x
If you have any service that uses the phone line, add a DSL or telephone
line filter (see page 25).
Caller id problems Possible solutions
Caller ID information does
not display.
x
Let calls ring twice before answering.
x
Make sure your Caller ID service is active.
Caller ID displays briefly and
then clears.
x
You may have to change the line mode. Contact
Customer Service for instructions.
multistation problems Possible solutions
I can’t transfer calls.
x
Reset all the stations (see page 25).
Two handsets can’t talk to a caller.
x
See if any station is in Privacy Mode.
A handset says unavailable .
x
Move the handset closer to the base.
x
See if any station is in Privacy Mode.
I can’t register a new handset.
x
Reset the handset (see page 25).
x
See if you have 12 registered handsets.
answering system problems Possible solutions
The answering system does not work.
x
Make sure the answering system is on.
x
Make sure the base is plugged in.
The system won't record messages.
x
See if Record Time is set to Announce Only .
x
Delete messages (memory may be full).
A handset can't access the answering
system.
x
See if another station is using the system.
x
Make sure the phone is in standby.
My outgoing message is gone.
x
If there was a power failure, re-record your
personal outgoing message.
I can’t hear the base speaker.
x
Make sure call screening is turned on.
x
Change the base speaker volume.
Messages are incomplete.
x
Increase the Record Time .
x
Delete messages (memory may be full).
The system keeps recording when I
answer on an extension.
x
You may have to change the line mode. Contact
Customer Service for instructions.
bluetooth problems Possible solutions
The D1789 won’t
pair with my phone.
x
Making sure your cellular phone is in pairing mode.
x
Check your cellular phone’s manual for instructions on Bluetooth
device pairing.
x
Making sure your cellular phone supports the Bluetooth hands-free
profile.
x
Checking the link order for that cellular phone.