Uniden D1779-12BT, Manual

Page: 16 / 28

16 - English
To... Press...
put an outside line call
on hold and make an
intercom call
MENu/sElECT
and select Hold/Transfer from the
off-hook menus. Select the handset you want
to talk with, or All to page all handsets at the
same time.
end an intercom call
END/ClEaR
. Both handsets return to standby.
Silent Mode
You can silence the ringers on the base and all handsets for a specific
period of time; the answering system answers any incoming calls without
playing anything through the speaker.
1. With the phone in standby, press and hold
#
on any handset. The phone
prompts you to select the number of hours (
1
-
9
or
Always On
) that you
want it to stay in silent mode.
2. To confirm, press
#
or just wait about 5 seconds. The phone turns on the
answering system and displays
Silent Mode On
on each handset.
3. After the selected number of hours, the phone automatically exits silent
mode. To exit silent mode manually, press and hold
#
again.
#
If the phone is in silent mode and you turn off the answering
system, the phone exits silent mode.
Multihandset Features
#
To use the features in this section, you need at least 2 handsets.
• Your base supports a total of 12 cordless handsets: the one that came
with the base and up to 11 DCX170BT accessory handsets. Your base
also supports a total of 2 DRX100 range extenders, including any that
came with your phone.
• You must register accessory handsets to the base before using them.
(Handsets that came packaged with the base are already registered.)
• Handsets that aren’t registered display a Not Registered message.
For registration instructions, see page 23, or see the accessory handset
manual.
• If a handset was ever registered to a base, you must reset it before it can
register to a new base; seepage 23, or see the accessory handset manual.
Conference Calling
• When an outside call comes in, two handsets and one cell phone can
join in a conference call with the outside caller.