Uniden D1483 Series, User Manual

Page: 13 / 20

English - 13
IMPORTANT INFORMATION
Troubleshooting
General problems Possible solutions
I can’t make or receive
calls.
x
Check the telephone cord connection.
x
Disconnect the base AC adapter. Wait a few
minutes, then reconnect it.
x
Make sure the base is plugged in.
The handset won’t ring.
x
Make sure the ringer is turned on.
The handset is not
working.
x
Charge the battery for 15-20 hours.
x
Check the battery connection.
The handset won’t
display CID information.
x
Let calls ring twice before answering.
x
Make sure your CID service is active.
Audio issues Possible solutions
I hear a beeping
during a call.
x
The battery is getting low. Check the handset for a low
battery alert. Finish your conversation and return the
handset to the cradle as soon as possible.
There’s a lot of
noise or static
on the line
x
Check for interference from appliances (microwave
ovens, TVs, etc.) or wireless devices (baby monitors, WiFi
equipment, etc.). Move the handset or base away from the
interference source.
x
Move the handset closer to the base.
x
If you use a telecoil hearing aid, turn the T-coil on (see p. 6).
Multi-handset problems Possible solutions
Two handsets can’t talk to a caller.
x
See if any handset is in Privacy Mode.
A handset says Unavailable .
x
Move the handset closer to the base.
x
See if any handset is in Privacy Mode.
Answering system problems Possible solutions
The answering system does not
work.
x
Make sure the answering system is on.
x
Make sure the base is plugged in.
The system won't record
messages.
x
See if Record Time is set to Announce Only .
x
Delete messages (memory may be full).
A handset can't access the
answering system.
x
See if another handset is using the system.
x
Make sure the phone is in standby.