Uniden BW3451R, Owner'S Manual

Page: 35 / 44

35
UsInG tHe InteRCoM
The Intercom feature lets you talk to whomever is within camera range.
1. Decide which camera you want to establish an intercom link with, and make it the
full screen live view camera.
2. Press and hold TALK the monitor.
3. Speak clearly into the microphone.
4. Release
TALK to listen to the response.
The system comes with one camera that has already been paired. It will
communicate with the monitor when it is powered on.
The pairing function lets you add up to 3 additional cameras to your system. It also
lets you re-pair your first camera if needed.
#
Pair the cameras to the monitor before mounting the cameras.
1. Verify that the monitor is powered on (see page 10).
2. Install and power on the accessory cameras according to the procedures
beginning on page 7.
3. Pair the accessory cameras according to the procedures on page 25.
4. Once the camera has been paired, it can be viewed on the monitor.
CAMeRA PAIRInG
3. Press LULLABY SKIP to skip to Lullaby #2. The system plays Lullaby #2 then
repeats it.
4. Press
LULLABY SKIP
to skip to Lullaby #3. The system plays Lullaby #3 then
repeats it.
5. Press LULLABY SKIP to skip to Lullaby #4. The system plays Lullaby #4 then
repeats it.
6. Press LULLABY SKIP to skip to Lullaby #1. The system plays Lullaby #1 then
cycles through all lullabies.
7. Press ▲Vol and ▼Vol on the monitor or camera to adjust the volume. Press
▼Vol all the way down on the monitor to mute the lullaby playing through the
monitor.
Monitor
As you use your monitor, keep the screen clean by wiping it with a microfiber cloth
to remove fingerprints, dust, etc.
Camera
When dust and grime builds up on the camera lens and glass, it affects the
camera’s “vision.” Use a microfiber cloth to regularly clean the cameras or when
night vision video is cloudy or unclear.
MAIntAInInG YoUR sYsteM