7
Select the
2.
Searching
mode on your Bluetooth device (refer to your Bluetooth device’s
owner’s manual for details if necessary).
Your Bluetooth device should find
3.
BTS200
; select it and use
0000
for a pairing code if
necessary.
Verify that you are connected to your speaker. The Bluetooth LED (
4.
) moves to a
steady ON state when pairing is complete.
Pair Second Bluetooth Device
Turn on your speaker,
1.
and continue to press and hold
until your speaker beeps
twice.
Release
2.
. The BTS200 is ready to pair.
Follow the same procedures for pairing your first Bluetooth device (see above).
3.
The Bluetooth Speaker can store pairing information for two devices but only one device can be
connected at a time. To switch between paired devices, disconnect the Bluetooth connection from the
existing device (see manual for your Bluetooth device) and then connect the second device.
BTS200 OM.indd 7
10/8/11 12:32:15 PM