6
Turn on Your Speaker
When you turn on your speaker for the first time, it automatically goes into pairing mode.
The Bluetooth LED ( ) flashes rapidly and is ready to pair (see p. 7). The next time you turn
on your speaker, it searches for already paired devices and then moves into a standby state.
Press and hold
1.
for at least 3 seconds.
All LEDs light and a power on tone sounds.
2.
3.
and
LEDs go out.
4.
flashes slowly while looking for Bluetooth devices. It remains steady on when
Bluetooth devices are discovered; otherwise, it goes out.
To turn off the speaker: Press and hold
for at least 3 seconds.
Pair Bluetooth Devices to Your Speaker
Pair First Bluetooth Device
Pair your first Bluetooth device to your speaker when you turn your speaker on for the first
time. Be sure your speaker is in pairing mode when you pair your second Bluetooth device
(see step 1-2 of ‘Pair Second Bluetooth Device’ below).
Select a Bluetooth V2.1 or above device (mobile phone or music player) to pair.
1.
BTS200 OM.indd 6
10/8/11 12:32:14 PM
