20
Battery Features
Your BTS200 comes equipped with a rechargeable Lithium-Ion polymer battery. You can
recharge the battery by connecting it to 240 VAC power through the AC adapter.
Install and Charge the Battery
See p. 5 for details on installing and charging the battery (the same procedures as for initial
turnup).
Remove the Battery
Press down on the battery latch to release the battery.
1.
With the battery latch pressed down, press down and push out the opposite end of the
2.
battery to slide it out of the battery compartment.
Check the Battery Level
Press the battery indicator button while the AC adapter is not connected to your speaker
(see p. 9). The battery LEDs light according to how much power remains in the battery:
3 LEDs = 100 - 70% remaining
•
2 LEDs = 70 - 35% remaining
•
1 LED = 35 - 15% remaining
•
0 LEDs = Less than 15% power remaining. When the battery level falls below 15% (0 LED)
•
status, the speaker sounds an alert tone.
BTS200 OM.indd 20
10/8/11 12:32:21 PM
