background image

17

• 

Check the laws and regulations on the use of mobile phones and hands-

free equipment in the areas where you drive. Always give full attention 

to driving and pull off the road and park before making or answering a 

call if driving conditions require.

• 

Do not allow children to play with your headset since it contains small 

parts that could become detached and create a choking hazard.

• 

Turn off your headset when pumping gas, handling flammable 

materials, or in any area with a risk of explosion. In rare occurrences, this 

product could generate sparks which can cause an explosion or fire. 

Follow all warning notices in your immediate area!

SAVE THESE INSTRUCTIONS! 

FCC Notice

This device complies with part 15 of the FCC rules. Operation is subject to the following two 

conditions: (1) This device may not cause harmful interference, and (2) This device must accept 

any interference received, including interference that may cause undesired operation. Privacy of 

communications may not be ensured when using this product.
To insure the safety of users, the FCC has established criteria for the amount of radio frequency energy 

various products may produce depending on their intended usage. This product has been tested 

and found to comply with the FCC’s exposure criteria. For body worn operation, the FCC RF exposure 

Summary of Contents for BT112APT





















Reviews: