28
Trigger - Channel X screen (Alarm Tab)
FIELD
DESCRIPTION
Buzzer
A buzzer sounds when an alarm is triggered if this selection is enabled.
Show Full Screen
A big screen popup alarm displays when an alarm is triggered.
To Alarm Out
This tab directs alarms to optional alarms (not included) added to the
system.
When enabled and an alarm is triggered, the system sends information
relevant to the alarm (alarm event, device name, etc.) to the user-
specified mailbox. (See page 32 to set up DVR email preferences.)
Snapshot
When enabled and an alarm is triggered, the system automatically takes
a snapshot of the selected channel and stores it on the hard disk.
Trigger - Channel X screen
Select which cameras record when an alarm is triggered.
Trigger - Channel X screen
Only applies if PTZ camera is installed (not included).
• Sets what type of action to take (Preset/Cruise/Track/None).
• Sets the point the PTZ camera will rotate to if preset selected.
Schedule Tab
Use this tab to set a time frames for the alarms to be active. This tab operates in the same way as
the
Schedule
screen on page 25.
