65
Programming/Editing Optional Settings
Notes:
• If you select 0, the scanner stays on the system for a
minimal time (only long enough to check current
system activity).
• The default setting is 2 seconds for each system.
• For conventional systems, all unlocked channels will
be scanned at least once regardless of this setting.
• The scanner moves to the next system after the hold
time expires, any current transmission ends, and the
channel delay time expires.
Setting the Channel Delay Time
J
program system
J
E
4
Select the system
J
E
4
Edit Sys Option
J
E
4
Set DELAY Time
J
E
This setting controls how many seconds the scanner
waits after a transmission ends before resuming
scanning. Enter a value from
1
-
5
or
Off
, then press
E
.
Notes:
• The default setting is 2 seconds for each system.
• This setting applies to all channels within the system.
Setting ID Scan/Search
(Trunked Systems Only)
J
program system
J
E
4
Select the system
J
E
4
Edit Sys Option
J
E
4
ID SCAN/SEARCH
J
E
This setting controls how the system will be scanned.
Select your setting, then press
E
.
ID Scan
- the scanner only stops on channels you have
programmed into the system.
Menu
Menu
