Uniden APCO 25 Owner'S Manual Download

Page: 66 / 84

Specifications

Certified in accordance with FCC Rules and Regulations Part 15, Subpart C, as of date
of manufacture.

Channel:

1000

Banks:

10 (100 channels each)

Service Bands:

12 preprogrammed search bands
(including the NOAA Weather Service band)

Frequency Range:

25.0-28.0 MHz

Petroleum Prod., CB Class D channels,
Business and Forest Products

28.0-29.7 MHz

10 Meter Amateur Band

29.7-50.0 MHz

VHF Low Band

50.0-54.0 MHz

6 Meter Amateur Band

54.0-108 MHz

VHF TV, FM broadcast, Intersystem
and Astronomy

108-137 MHz

Aircraft Band

137-144 MHz

Military Land Mobile

144-148 MHz

2 Meter Amateur Band

148-174 MHz

VHF High Band

174-406 MHz

VHF TV, 1.25 Meter Amateur Band, UHF
Aircraft Band

406-420 MHz

Federal Government

420-450 MHz

70 cm Amateur Band

450-470 MHz

UHF Standard Band

470-512 MHz

UHF TV Band

806-956 MHz

800 Band

1240-1300 MHz 25cm Amateur Band

Operating Temperature: –20 °C to +60 °C (-4 °F to +140)

Scan Rate:

100 channels per second (conventional mode)

Search Rate:

100 steps per second (Normal Search)
300 steps per second (Turbo Search)

Audio Output:

Maximum 3.0W (2.3W normal @ 10% THD)

Internal Speaker:

8 ohms (56 mm outer diameter)

Power Requirements:

AD580U AC Adapter (13.8V DC, 700mA)

Antenna:

Telescopic Antenna (included)

Antenna Jack:

BNC type

External Jacks:

External Speaker (EXT.SP.) (3.5 mm)
DC 13.8 V Power Jack, (center is positive)
Remote Control (REMOTE) Jack (DB-9)
Tape Recorder Out (TAPE OUT) Jack (3.5 mm)
Digital Card Slot

Size:

6-15/16 in. (W) x 6-9/16 in. (D) x 2-3/8 in. (H)
176.5mm (W) x 167mm (D) x 61mm (H)

Weight:

1.44 kg (50.8 oz.)

Features and specifications are all subject to change without notice.

Summary of Contents for APCO 25





















































































Search results

Summary of Contents for APCO 25

Reviews:

Related manuals for APCO 25

Brands by name

Popular brands

Uniden APCO 25, Owner'S Manual

Search results

Summary of Contents for APCO 25

Reviews:

Related manuals for APCO 25

Brands by name

Popular brands