35
UNIDEN XTRAK
UHF CB Transceiver
Operation - Special Features
Making a Selcall Call (Tone Calling)
Tone Calling allows you to selectively call other radios who have also setup Selcall.
For convenience, the Selcall ID of the radio you are going to call should be in the Selcall
ID memory (see Storing Sellcall IDs of other users to the ID Memory p.39).
If not then the Selcall ID can be manually entered for this call.
To Call:
1. Select the channel that you and your group agreed to use for Selective Calling.
2. Press and hold
[SELCALL]
for 2 seconds.
A double beep tone will sound and the last stored ID or last transmitted ID will be
displayed.
3. Use
[UP / DOWN]
to select the desired Selcall ID.
If the desired Selcall ID is not stored in the ID memory you can manually enter the ID as
follows;
i). Press
[SCAN]
to begin ID edit. The 5th digit of the ID flashes.
ii). Press
[UP / DOWN]
to select the desired ID.
iii). Use
[TRI /S]
or
[SQL /S]
to shift between digits.
A 6th digit (for 6 tone Selcall) is available and indicated by a ‘_’.
4. Press
[SELCALL]
to transmit the Selcall.
TX-CAL
will display when transmitting the Selcall.
An acknowledge tone coming from the called radio will be received if you have
successfully made contact. The acknowledge tone for the XTRAK is a succession of
three low tone beeps.
XTRAK 80 OM_First Lot_print_r5.indd 35
XTRAK 80 OM_First Lot_print_r5.indd 35
4/06/2021 1:30:51 PM
4/06/2021 1:30:51 PM