34
UNIDEN XTRAK
UHF CB Transceiver
Operation - Special Features
Storing Selcall IDs of Other Users to the ID Memory
NOTE
• Up to 10 ID memories can be stored.
• If you expect to make calls to radios not stored in the ID memory then
leave memory ID 1 blank for manual ID entry at the time of the call.
1. Press and hold
[SELCALL]
. The Selcall ID memory will open and the first entry (1 of
10) flashes.
2. Press
[UP / DOWN]
to select a desired memory number to edit.
3. Press
[SCAN]
to begin the ID edit. The 5th digit of the ID flashes.
i). Press
[UP / DOWN]
to select the desired ID digit.
ii). Use
[TRI /S]
or
[SQL /S]
to shift between digits.
A 6th digit (for 6 tone Selcall) is available and indicated by a ‘_’.
4. When the desired ID is entered press
[SCAN]
to move to Alpha Tag selection.
A cursor flashes in the 1st alpha position. The default aplha tag is blank - displays as
No Name. If you do not wish to name the ID then skip to step 9.
i). Press
[UP / DOWN]
to select the desired alpha character.
ii). Use
[TRI /S]
or
[SQL /S]
to shift between cursor positions.
5. When finished press
[SCAN]
. A confirmation tone sounds to indicate the ID is
programmed. The memory number flashes to enable selection for programming of
next memory if desired.
6. Press
[PTT]
, or wait for 10sec, to exit programming mode.
XTRAK 80 OM_First Lot_print_r5.indd 34
XTRAK 80 OM_First Lot_print_r5.indd 34
4/06/2021 1:30:51 PM
4/06/2021 1:30:51 PM
