Uniden 9322402015538 Owner'S Manual Download

Page: 13 / 52

Setting the Auto Squelch Level

The Squelch function is the radio’s signal filter. It determines when the radio’s speakers

turn on, based on the strength of received signals. This avoids background noise and

undesired signals constantly coming through the speakers.

The Auto Squelch feature has an off (Sq0) setting and 9 preset squelch levels:

It requires no adjustment once set.

Sq0 (off) - squelch is fully open to noise & signals

This is also the Monitor Mode

Sq1

- max sensitivity (min squelch)

Weak (distant) signals can open the squelch.

Sq5

- med sensitivity (med squelch)

Medium and strong signals can open the squelch.

Sq9

- min sensitivity (max/tight squelch)

Only strong/nearby signals can open the squelch.

Setting the Squelch level from the MENU

1. Press

[MENU]

. Squelch is the first option. Press

[MENU]

again.

The squelch setting display at the current level.
2. Press

[UP / DOWN]

to select a squelch level setting.

3. Press and hold

[MENU]

to store the setting.

Setting the Squelch level by [SQL /S] Smart Key

When the

[SQL /S]

Smart Key is set to SQL, press

[SQL /S]

to increment the squelch

one level each press. When the squelch level is maximum the next press cycles back

to Sq0 (Monitor mode). The squelch bar is an indication of the increasing squelch

levels - one bar equates to 2 squelch increments.

NOTE

• If Sq0 (open squelch) is selected then MON (monitor) icon flashes.

• Setting a tight squelch may prevent the reception of weak signals.
• High noise areas may still break the squelch.

Monitor Mode

The Monitor mode is the squelch function turned off. Use Monitor mode to quickly

check the channel for any weak signals, or if using DCS/CTCSS.

Enable/Disable Monitor Mode by SMART Key

When a SMART key is set to MON, press the assigned SMART key to turn Monitor

mode on or off.

MON

will flash on the display when Monitor is on.

Monitor mode is also entered when the SQL level is set to Sq0.

Operation

UNIDEN XTRAK

UHF CB Transceiver

XTRAK 80 OM_First Lot_print_r5.indd 13

4/06/2021 1:30:50 PM

Summary of Contents for 9322402015538





















































Search results

Summary of Contents for 9322402015538

Reviews:

Related manuals for 9322402015538

Brands by name

Popular brands

Uniden 9322402015538, Owner'S Manual

Search results

Summary of Contents for 9322402015538

Reviews:

Related manuals for 9322402015538

Brands by name

Popular brands