33
TROUBLESHOOTING
If your 7500AI 7500AI unit is not performing to your expectations, please try
these simple steps.
PROBLEM
SUGGESTION
Answering system does not work
• Make sure the telephone line cord
is plugged in.
• Make sure that the AC Adaptor
is plugged in.
• Make sure the 7500AI is turned on.
• There has been a power failure.
Disconnect the telephone line cord,
reset the 7500AI (refer to page 38) and
re-connect the telephone line cord.
Answering System does not answer
• The memory may be full. Delete some
after the set number of rings.
or all of the saved messages.
• You might have exceeded the total
number of REN. See page 5.
Messages are incomplete.
• The incoming messages may be too
long.
• The memory may be full. Delete some
or all of the saved messages.
No sound on the speaker during call
• Adjust the volume control on the side
monitoring or message playback.
the 7500AI.
Cannot record outgoing message (OGM) • The memory may be full. Delete some
or all of the saved messages.
Cannot access remote call-in features
• Make sure you’re using the correct
from another touch-tone phone.
security number.
• Make sure that the touch-tone phone
you’re using can transmit the tone for
at least two seconds. If it cannot, you
may have to change to another phone.
