SETTING UP
SETTING UP
13
NUMBER OF RINGS
The 7500AI can be set to 2, 4 or 7 rings
before it plays the OGM and receives the
call. To set the ringer, move the ringer
select switch to the desired position.
TS (TOLL SAVER)
The 7500AI has New Message Detection to avoid unnecessary toll charges
when calling long distance to check your messages. To use this feature set the
ringer select to
TS
. If there are new messages, the 7500AI will answer after 2
rings, otherwise it will answer after 4 rings. Thus, when checking messages
you can hang up after 2 rings because the 7500AI has no new messages.
OUTGOING MESSAGES (OGM)
The 7500AI will not receive calls until at least one of the outgoing messages
has been recorded.
• OGM 1 plays the message you recorded, and lets the caller leave a
message of up to 60 seconds.
• OGM 2 (announcement only) plays the message you recorded, and
hangs up without letting the caller leave a message. This is useful for
announcing information about an upcoming event.
NOTE:
Be sure the announcement clearly states that the caller cannot leave a message.
If the 7500AI memory becomes full, it will automatically switch from OGM 1 to
OGM 2 and play that message for any new calls.
