[ 1 4 ] G E T T I N G S T A R T E D
w w w . u n i d e n . c o m
C. Connect the base unit
1) Connect the AC adapter to the
DC IN 9V
jack and to a
standard 120V AC wall outlet.
2) Set the base on a desk or tabletop, and place the
handset in the base unit.
3) Make sure that the
charge
LED illuminates.
If the LED does not illuminate, check to see that the AC adapter
is plugged in and the handset makes good contact with the base
charging contacts.
• Connect the AC adapter to a continuous power supply.
• Place the base unit close to the AC outlet so that you can
unplug the AC adapter easily.
• After installing the battery pack in the handset, charge your handset at least
15-20 hours
before plugging into the phone line
.
4) Once the handset battery pack is fully charged,
connect the telephone line cord to the
TEL LINE
jack
and to a telephone outlet.
If your telephone outlet isn't modular, contact
your telephone company for assistance.
•Use only the supplied
[AD-800] AC adapter.
Do not use any other
AC adapter.
•Place the power cord
so that it does not
create a trip hazard or
where it could
become chafed and
create a fire or
electrical hazard.
note
UP01317BA̲0.book 14 ページ ２００３年１０月３０日 木曜日 午前１０時４５分
