Manual – 3000 NRL Family
Unidata Manual - 3000 NRL Family - 17 09 2018.docx
Page 14
3.3 Configure
Logger
Various logger parameters can be configured via the Configure Logger button.
These parameters are divided into three menus;
1. General
2. Comms
3. Inputs
Press the
ENTER
button (if the logger display is sleeping) and then the
CONFIGURE
LOGGER
button on the LCD touch screen to enter the configuration menus. Repeated
pressing of the
CONFIGURE LOGGER
button will allow access to the three different
menus.
To scroll through the list of parameters within each menu use the
▼
DOWN and UP
▲
keys. To change a parameter the
▼
DOWN and UP
▲
keys should be used to navigate to
the desired parameter. The
◄
LEFT and RIGHT
►
keys in combination with the
▼
DOWN and UP
▲
keys can be used to select and change values.
3.3.1 General Configuration Parameters
Parameter Notes
Enter PIN #
Enter the current 4 digit PIN #
Change PIN #
Change the PIN #
Turn display off
Forces the screen to turn off immediately
Reset logger
Reconfigures the logger to factory defaults
Lock display on
Prevents the screen from automatically turning off
Turn logger off
Disables the communications scheduler, instrument scan and
scheme interpreter
Set scan rate
Set FAST
Set Year
Configure the current time and date
Set Month
Set Day
Set Hour
Set Minute
Config General
...press Down
Logger
Status
Scheme
Status
Configure
Logger
Comment [AG1]:
To do - check
