FOODBOX TOUCH, FOODBOX LONG TOUCH, FOODBOX LIFT TOUCH
Page 22
Version 1.3 / December 2018
3.
Software updating
: To update the vending machine software visit the manufacturer’s web-site
http://
www.unicum.ru
and in the DOCUMENTATION section select on the opened page the necessary
model of the vending machine for updating the software. Then on the opened page select the CON-
TROLLER FIRMWARE section, following which the file downloading to the computer starts. The files are
downloaded in the form of an archived folder. To record these files to the USB-flash drive extract the folder
and save the folder contents to the USB-flash drive root directory. In the archived folder, there are files for
updating the vending machine software with the explanatory text files.
To update the vending machine insert the USB-flash drive with the saved files into the controller
board USB connector. After these files are recognized by the controller the display will show the proposal
to update the software.
To load the power board software confirm the request: Load shack software?
To load the controller board software confirm the request: Load software?
Editing the configuration files, as well as viewing the audit files is realized by using the special
Unicum Vending Machine Tools program, which can be downloaded from the following link:
https://uonline.unicum.ru/ef/tools/uVMTools.msi
7.2 Service buttons
When the control compartment is pulled out, from above the control compartment the three service
b USB connector become available (fig. 2 pos. 2).
The buttons have the following functions:
-
operator menu
- to enter the operator menu;
-
menu technician
- to enter the menu technician;
-
test
- the products giving out mode without payment (for testing the vending machine operation).
-
the USB PC connector
– for connecting the USB-flash drive to the vending machine PC (monob-
lock).
