background image

Introduction

EKZT-Series | Version 1.03

3

1 Introduction

You have made a good choice by purchasing the Uni-
craft electric chain hoist.

Read the operating manual thoroughly before com-
missioning the machine. 

It gives you information about the proper commission-
ing, intended use and safe and efficient operation and 
maintenance of your electric chain hoist. 

The operating manual is part of the electric chain hoist 
package. Always keep this operating manual in the lo-
cation where your electric chain hoist is being operated. 
All local accident prevention regulations and general 
safety instructions for the operating range of your elec-
tric chain hoist must also be complied with. 

1.1 Copyright

The contents of these instructions are copyright. They 
may be used in conjunction with the operation of the 
electric chain hoist. Any application beyond those de-
scribed is not permitted without the written approval of 
Stürmer GmbH.For the protection of our products, we 
shall register trademark, patent and design rights, as this 
is possible in individual cases. We strongly oppose any 
infringement of our intellectual property

1.2 Customer service

Please contact your dealer if you have questions con-
cerning your electric chain hoist or if you need technical 
advice. They will help you with specialist information and 
expert advice. 

Germany:

Stürmer Maschinen GmbH 
Dr.-Robert-Pfleger-Str. 26 
D-96103 Hallstadt 

Repair service:

Fax: 

0049 (0) 951 96555-111 

E-Mail: [email protected]
Internet: www.unicraft.de

Spare part orders:

Fax: 

0049 (0) 951 96555-119 

E-Mail: [email protected]

We are always interested in valuable experience and 
knowledge gained from using the application-which then 
could be shared and be valuable to develop our products 
even further. 

1.3 Limitation of liability

All information and notes in these operating instructions 
were summarised while taking applicable standards and 
rules, the state-of-the-art technology and our long-term 
knowledge and experiences into consideration. 

In the following cases the manufacturer is not liable for 
damages: 

- Non-observance of the operating instructions,

- Inappropriate use

- Use of untrained staff,

- Unauthorised modifications

- Technical changes,

- Use of not allowed spare parts.

The actual scope of delivery may deviate from the ex-
planations and presentations described here in case of 
special models, when using additional ordering options 
or due to latest technical modifications.

The obligations agreed in the delivery contract, the gen-
eral terms and conditions as well as the delivery condi-ti-
ons of the manufacturer and the legal regulations at the 
time of the conclusion of the contract are applicable.

2 Safety

This section provides an overview of all important safety 
packages for the protection of operating personnel as 
well as for safe and fault-free operation. Other task-ba-
sed safety notes are included in the paragraphs of the in-
dividual phases of life.

2.1 Symbol explanation

Safety instructions

The safety notes in these operating instructions are high-
lighted by symbols. The safety notes are introduced by 
signal words which express the concern of the risk. 

DANGER!

This combination of symbol and signal words indi-
cates an imminently dangerous situation which may 
lead to death or severe injuries if they are not avoided. 

WARNING!

This combination of symbol and signal words indi-
cates a possibly dangerous situation which may lead 
to death or severe injuries if they are not avoided. 

Summary of Contents for EKZT 301-1



























Reviews: