background image

Safety

SSK 3.1 | Version 1.07

5

2.3 Requirements to staff

The different tasks described in this manual represent 
different requirements to the qualification of the persons 
entrusted with these tasks 

Only persons reliable working procedures can be ex

-

pected from, are allowed to perform all works. Persons 
the responsiveness of which is affected by e. g. drugs, 
alcohol or medication, are not allowed to work with the 
machine

The qualifications of the personnel for the different tasks 
are mentioned below:

Operator:

The operator is instructed by the operating company 
about the assigned tasks and possible risks in case of 
improper behaviour. Any tasks which need to be per

-

formed beyond the operation in the standard mode must 
only be performed by the operator if it is indicated in 
these instructions and if the operating company expres

-

sively commissioned the operator.

Electrician:

The electrician is due to their professional training, 
knowledge and experience as well as knowledge of the 
relevant standards and regulations able to work on 
electrical systems and independently recognize and 
avoid possible dangers. The electrician is specially trai

-

ned for the work environment in which he works and 
knows the relevant standards and regulations.

Qualified personnel:

Due to their professional training, knowledge and experi

-

ence as well as their knowledge of relevant regulations 
the specialist staff is able to perform the assigned tasks 
and to recognise and avoid any possible dangers them

-

selves.

Manufacturer:

Certain works may only be performed by specialist per

-

sonnel of the manufacturer. Other personnel is not au

-

thorized to perform these works. Please contact our cu

-

stomer service for the execution of all arising work.

2.4

P

ersonal protective equipment

The personal protective equipment serves to protect per

-

sons against impairments of safety and health while 
working. The staff member has to wear personal protec

-

tive equipment while performing different tasks on and 
with the machine which are indicated in the individual 
paragraphs of these instructions.

The personal protective equipment is explained in the 
following paragraph:

WARNING!

Danger due to insufficient qualification of 
persons!

Insufficiently qualified persons cannot estimate the 
risks while using the machine and expose them

-

selves and others to the danger of severe or lethal 
injuries.

-  Have all works only performed by qualified persons.

-  Keep insufficiently qualified persons out of the work

-

ing area.

Head protection

The industrial helmet protects the head against fall

-

ing objects and hitting on fixed objects.

Ear protection

The ear protection protects against hearing damage 
caused by noise.

Respiratory protection

The respiratory protection protects the respiratory 
tract against the ingress of dust and small foreign 
bodies.

Safety glasses

The protective glasses serve to protect the eyes 
against parts flying off.

Safety gloves

The protective gloves serve to protect the hands 
against sharp components as well as against fric

-

tion, abrasions or deep injuries.  

Safety boots

The safety boots protect the feet against crushes, fall

-

ing parts and slipping over on slippery underground. 

Protective clothes

Protective clothes are made of a tightly fitted fabric 
without the protruding parts of low tear strength.

Summary of Contents for 6204005

















Reviews: