background image

4

SRWH-Series | Version 1.01

Safety

Tips and recommendations

It is necessary to observe the safety notes written in 
these operating instructions in order to reduce the risk of 
personal injuries and damages to property. 

2.2 Obligations of the operating company

of the operator

The operating company is the person who operates the 
floor jack for business or commercial reasons by her-
self, or leaves it to a third party for use or application, 
and who bears the legal product responsibility for the 
protection of the user, the staff or for third parties.

Obligations of the operating company

If the floor jack is used for commercial purposes, the 
operating company of the floor jack must comply with 
the legal working safety regulations. Therefore, the saf-
ety notes in this operating manual, as well as the safety, 
accident prevention and environment protection regula-
tions applying for the area of application of the floor jack 
must be met. The following applies in particular:

- The operating company must be informed about 

the applying industrial safety regulations and fur-
ther analyse hazards resulting from the special 
working conditions at the place of use of the floor 
jack. She must implement these in form of ope-ra-
ting manuals for the operation of the floor jack.

- During the entire lifetime of of the floor jack, the 

operating company must verify whether the oper-
ating manuals prepared by her correspond to the 
current status of the regulations, and must adapt 
these if necessary.

- The operating company must unambiguously reg-

ulate and determine the responsibilities for instal-
lation, operation, troubleshooting, maintenance 
and cleaning.

- The operating company must ensure that all per-

sons who work with the floor jack, have read and 
understood this manual. Furthermore she must in-
struct the staff in regular intervals and inform them 
about the hazards.

- The operator must provide the necessary protec-

tive equipment to the staff and order the use of the 
necessary protective equipment in a binding way.

Furthermore the operating company is responsible to 
keep the floor jack always in a technically flawless state. 
Thus, the following applies:

- The operator must ensure that the maintenance in-

tervals described in this manual are kept.

- The operator must have all safety devices che-

cked regularly for their good working order and 
their integrity.

2.3 Requirements to staff

Qualifications

The different tasks described in this manual represent 
different requirements to the qualifications ot the per-
sons entrusted with these tasks.

Only persons reliable working procedures can be ex-
pected from, are allowed to perform all works. Persons 
the responsiveness of which is affected by e. g. drugs, 
alcohol or medication, are not allowed to work with the 
machine.

CAUTION!

This combination of symbol and signal words indi-
cates a possibly dangerous situation which may 
lead to minor or light injuries if they are not avoided. 

ATTENTION!

This combination of symbol and signal words indi-
cates a possibly dangerous situation which may 
lead to property and environmental damages if they 
are not avoided. 

NOTE!

This combination of symbol and signal words indica-
tes a possibly dangerous situation which may lead to 
property and environmental damages if they are not 
avoided.

Tips and recommendations

This symbol highlights useful tips and recommenda-
tions as well as information for an efficient and trou-
ble-free operation. 

WARNING!
Danger in case of insufficient qualification 

ot the staff!

Insufficiently qualified persons cannot estimate the 
risks while using the floor jack and expose them-sel-
ves and others to the danger of severe or lethal inju-
ries. 
-  Have all works only performed by qualified per-

sons.

-  Keep insufficiently qualified persons out of the wor-

king area.

Summary of Contents for 6201121





















Reviews: