UT4B0 User Manual
UC-00-M24 EN R2
Installation and Configuration
12
Step 5: Start UPrecise software installed in PC and connect the receiver through the
software
Step 6: Operate the receiver through UPrecise and record relevant data
4.3
Power-on
Connect the serial port and GNSS antenna of UT4B0, start the power supply (UT4B0
supply voltage at 3.3VDC). The receiver starts and quickly establishes communication
upon being powered on.
Unicore provides dedicated test tooling for the board test.
4.4
Setting and Output
The satellite display and control software UPrecise provides a graphic interface for
users of the UT4B0 module based receiver. With the software, the user can make
various settings of the receiver conveniently and quickly obtain the receiver status and
required information. UPrecise offers the following functions:
Connect the receiver and configure the baud rate
Display the graphical window of the preliminary orientation, PRN and SNR of
the satellite (Constellation View)
Display the trajectory window of the current points and historical points of the
receiver and display the location, speed and time (Trajectory View)
Record the graphical window of various logs and issue the instructions to the
receiver (Logging Control View)
Window to issue instructions to the receiver (Console View)
Issue instructions to the receiver
Trajectory point display
Upgrade firmware
TTFF test
