UC-00-M15 EN R1.4
Installation
8
Antenna cable
Straight-through cable
Desktop or laptop computer with serial port and installed with uSTAR_L
Please keep the packing box and anti-static box for storage and handling.
2.2
Installation
Follow the below steps to install UM220-IV L and EVK.
Step 1.
Ensure adequate anti-static measures, such as wrist straps, workbench
grounding, etc.
Step 2.
Open UM220-IV L EVK suite, and take out the evaluation board.
Step 3.
Select the GNSS antenna with the appropriate gain (the system frequency
supported by the antenna should be consistent with the module) , fix it in the
non-occluded area, and use the appropriate cable to connect the antenna and
the UM220-IV L EB (evaluation board);
Step 4.
Connect the PC to the EVK serial port using a straight-through cable.
Step 5.
Power on the evaluation board and initialize UM220-IV L.
Step 6.
Open the uSTAR_L software.
Step 7.
Configure the receiver through uSTAR to display constellations view,
messages, and receiver status, etc.
