UM220-IV L User Manual
UC-00-M15 EN R1.4
Installation
7
Antenna
PC
Built in UM220-IV L EVK
or the receiver
Figure 2- 1 Typical Installation of UM220-IV L
Have the following accessories ready before starting the installation:
UM220-IV L EVK (including a power supply)
UM220-IV L User Manual
uSTAR_L executable file
Qualified GNSS antennas
2
Installation
2.1
Prerequisites
Most components on the
UM220-IV L
module are
static sensitive devices
(SSD)
and
require ESD protection for IC
circuits
and other devices. Perform the
following
protection
measures
before opening
antistatic plastic
boxes.
Perform the steps in section
in the correct order;
Electrostatic
discharge
(ESD)
may
cause
a
damage
to
the
device.
All
operations
referred to in this
section
should
be performed on an
ESD
workbench using
wrist
straps
and conductive foam pads. If there is no anti-static workbench, wear
wrist
straps
and
connect
their
other
ends
to
the
metal
frame
to
avoid
electrostatic
damages;
Hold the edge of the module, do
NOT
touch the components directly;
Carefully check
the module for any apparent loose or damaged components. If
there are any
questions, please contact
Unicore
or
the
local distributors.
Typical Installation of UM220-IV L
shows the typical installation of
the
UM220-IV L EVK.
