background image

6  

Management 

anagement enables user to set up Remote Management features. 

.1 Remote Management 

is screen enables user to set up remote management. Using remote management, the router c

nfigured via a Web browser. A user name and password are required to perform remote managem

 

 

TTP:

 Enables user to set up HTTP access for remote management. 

low to Ping WAN Port:

 Type a range of router IP addresses that can be pinged from remote locat

PNP:

 UPNP is short for Universal Plug and Play that is a networking architecture that pro

mpatibility among networking equipment, software, and peripherals. The Router is an UPnP en

uter and will only work with other UPnP devices/software. If user does not want to use the U
nctionality, selecting “Disabled” can disable it. 

AMING MODE: 

If user is experiencing difficulties when playing online games or even c

plications that use voice data, user may need to enable Gaming Mode for these applications to 
rrectly. When not playing games or using these voice applications, it is recommended that Ga

ode be disabled. 

PTP:

 Enables user to set up PPTP access for remote management. 

Sec:

 Enables user to set up IPSec access for remote management. 

ENT:

 Default is stealth.  This enables user to set port 113 stealth. 

7

Tools

Summary of Contents for WEP-72104G-1























































Reviews: