ce:
Defines the source of the incoming packet where rule is applied.
Interface:
Select which interface (WAN or LAN) the rule is applied to.
IP Range Start:
Type the start IP address where rule is applied.
IP Range End:
Type the end IP address where rule is applied.
nation:
Defines the destination of the incoming packet where rule is applied.
Interface:
Select which interface (WAN or LAN) the rule is applied to.
IP Range Start:
Type the start IP address where rule is applied.
IP Range End:
Type the end IP address where rule is applied.
Protocol:
Select the protocol (TCP, UDP, or ICMP) of the destination.
Port Range:
Select the port range.
Click to add the rule profile to the table at the bottom of the screen.
ate:
Click to update information for the rule if user have selected a list item and have ma
ges.
e:
Select a list item and click
“Delete”
to remove the item from the list.
Click
“New”
to erase all fields and enter new information.
ity Up:
Select a rule from the list and click
“Priority Up”
to increase the priority of the rule.
ity Down:
Select a rule from the list and click
“Priority Down”
to decrease the priority of t
ate Priority:
After increasing or decreasing the priority of a rule, click
“Update Priority”
to sa
hanges.
