01865 767676
www.unicol.com
3
Revised 22/01/21
STEP 1
Lying the mast on a flat surface, connect base to
mast as shown. The cabinet door side should be
on the rear of the stand. The base should also have
less space at the rear than at the front.
STEP 2
Unlock and lift out rear door. Remove upper rear
panel by unscrewing 4x M6 screws.
STEP 3
Ensuring that the top 4 bolts are half screwed into
position at the top of the mast, take one of the
heavy duty arms and slide the bolts through the key
hole slots and allow the arm to rest on the bolts.
Repeat for the other side.
STEP 4
Before tightening the bolts, take the front fixing
panel and, using the keyhole slots, slide the panel
into position. Tighten the top four bolts.
Fix four bolts into the bottom four holes.
