5
Power Assist HD, Instruction & Safety Manual
T
08 9351 7500
E
W
www.unicarehealth.com.au
Operating the PMW-PSHD
•
Direction: Press the power button, the forward button will illuminate to indicate the direction of
going forward. Press the backward button and its light will illuminate to indicate the PMW-PSHD
will go backward.
•
Lift-up strap: The PMW-PSHD comes with a lift-up strap to allow the wheelchair to move when
there is no power. Lift up the PMW-PSHD with the red strap and hook the second loop around
the push handle. Please note that failure to lift up the PMW-PSHD when reversing may cause the
pack to fl ip over.
•
Maximum Speed: Always set a maximum speed which you are comfortable walking with.
•
Pushing the Wheelchair When Not In Use: We recommend that the powerpack is restrained with
the lift-up strap when not in use.
Handle Set Operation
Please note there is a 2-second delay when starting up the PS-HA HD before the wheel will move. Wait
2 seconds before squeezing the trigger.
•
Trigger – Squeeze the trigger to propel the PMW-PSHD. The more the trigger is squeezed, the
faster the PMW-PSHD will travel. Release the trigger to stop the PMW-PSHD
•
Speed Dial – Turn the dial clockwise to increase the maximum speed of the PMW-PSHD. Turn the
dial anticlockwise to reduce the PMW-PSHD maximum speed.
•
Inner Knob – This is used to determine the angle of the handle set.
