4
T
08 9351 7500
E
W
www.unicarehealth.com.au
3. Powerpack Installation
Feed the telescopic bar through the front end of
the PMW-PSHD. Loosen the tristar knob on the
bar and adjust to the correct length.
Tighten the knobs on the bar and at the front of
PMW-PSHD.
Place the two ends of the bar on the rear of the
Brackets, then push the powerpack forward
until it locks in position.
Place the battery pack in to the battery tray as
shown in the photograph. Secure the battery
pack on its tray.
Final Connection
Connect the cable from the power pack in to
the underneath of the handset. Place the top
loop of the lift-up strap around the opposite
push handle to the handset.
4. Battery Installation
