13
Kinetic Spectra, Instruction & Safety Manual
T
08 9351 7500
E
W
www.unicarehealth.com.au
Use of the Hand Control
Using Programs
The KINETEC Spectra allows you to store up to 16 programs, including the type of treatment, ROM,
speed, load, pauses and timer.
The original parameter values of the program are empty.
These values can be modifi ed and recorded at any time (see ‘How to enter a program’ page 10).
Begining
Keys to press
Display
Remarks
To stop the unit
PROGRAM 10
Check of the hand
40 STOP 15 100
control is not blocked
(See page 7)
To access the program
PROGRAM 1
The program number
mode
70 WARMUP 10
blinks
To change the program
PROGRAM 3
The new program
if necessary
25 WARMUP 90
number blinks
To exit and validate
KINETIC
The current
the selected program
Please Wait
parameters have
been recorded in
program 3
To exit without
KINETIC
Back to the starting
validation of selected
40 STOP 15 110
parameters
program
Start the unit
warning
The value change at
25 run 20 90
the speed of the
movement
Comments:
• The values shown in the ‘Display’ column are examples. They actually depend on the stored
programs.
• The current movement parameters can be changed while using that program but no data will be
stored in the original program.
See the programming mode (p 10) to modify programs.
Or
