17
Installation instructions
3
INSTALLATION
INSTRUCTIONS
3.1 - GENERAL WARNINGS
ATTENTION!
This boiler is intended solely for the use
for which it was expressly designed. Any
other use is to be considered improper and
therefore dangerous.
This boiler heats water at a temperature
lower than the atmospheric pressure boiling
temperature.
ATTENTION!
The appliances are designed to be installed
inside suitable rooms or technical spaces
only. The appliances cannot be installed or
operate outdoors. Outdoor installation can
cause malfunctioning and be dangerous.
Choose specifically designed appliances for
outdoor installation.
Before connecting the boiler, have professionally
qualified personnel:
a) Thoroughly wash all the piping of the system
to remove any residue or impurities which
could jeopardise proper operation of the
boiler.
b) Check that boiler is set up to operate with the
available type of fuel.
This can be seen written on the package and
on the technical feature plate.
c) Check that the chimney/flue has an appropriate
draught, without any bottlenecks, and that no
exhausts from other appliances are inserted,
unless the flue has been implemented to
accommodate several utilities according to
specific standards and prescriptions in force.
Only after this check can the fitting between
the boiler and chimney/flue be mounted.
ATTENTION!
In rooms with the presence of aggressive
vapours or dust, the appliance must operate
independently from the air inside the
installation room!
ATTENTION!
The appliance must be installed by a qualified
technician with the technical-professional
requirements according to law 46/90 which,
under his own responsibility, guarantees
compliance with standards according to
good practice rules.
The boiler must be connected to a central heating
system and/or domestic hot water supply network
compatible with its efficiency and output.
