37
Maintenance instructions
ENGLISH
-
Remove the gas diaphragm 4
- Insert gaskets 6
- Proceed with assembly in reverse order.
-
Insert the new diaphragm 5 (contained in the gas
conversion kit)
- Access the modulation board contained in the
electric panel and position the jumper in the
position corresponding to the new type of gas
indicated in the figure;
Ending of gas transformation see chap. 4.3.1
-
Remove gas valve (unscrew connection 2, wrench
30 mm).
Model KONm 28 - KONm
35:
- Disconnect the appliance from the elctrical power supply
- Close the gas inlet tap
