Unical IDRONIK TS 13, Istructions For Installer, User And Service Man

Page: 19 / 20

19
Codes fault
E5 E5
E5 E5
E5
The appliance has integral diagnosis system that, in case of
bad operation, allows the immediate indication of the fault
type on the panel board.
Herewith are listed the known error codes.
E1 E1
E1 E1 E1
Lack of ignition /
lack of gas supply
Actions:
Open the gas cock
Effect: Flame lockout
CODE
APPEARING
ON THE DISPLAY
e0 e0
e0 e0
e0
Fault thermostat
Actions:
Contact the Service Center
Effect: Flame lockout
E4 E4 E4 E4 E4
Faulty fan or its circuit
Actions
Contact Service Center
Effect Flame lockout
E8 E8
E8 E8 E8
Faulty gas valve
Actions:
Check gas valve and its connec-
tions
Effect: STOP
6
ERROR CODES
Maximum temperature ptotection
Actions:
Control the circulation
Effect: STOP
E3 E3 E3 E3 E3
Obstructed discharging system /
excessive external ventilation
Actions:
Contact Service Center
Effect: Flame lockout
E6 E6
E6 E6 E6
Faulty temperature sensor on the hot
water outlet
Actions:
Cheks sensor and its connections
Effect: STOP
LOCKOUT:
The resetting is done by cutting the power, or by closing and
opening the hot water tap.
STOP:
is intended ignition not allowed (SERVICE)
CODE
APPEARING
ON THE DISPLAY
CODE
APPEARING
ON THE DISPLAY
CODE
APPEARING
ON THE DISPLAY
CODE
APPEARING
ON THE DISPLAY
CODE
APPEARING
ON THE DISPLAY
CODE
APPEARING
ON THE DISPLAY
Table - PROBLEM LIST